SaniSweep XL, the Chlorine Dioxide
The Sanipur solutions for Legionella remediation with ClO2.
SaniSweep XL Technologies
Chlorine dioxide was shown to be an effective biocide in fighting Legionella into hot water networks.
Together with a suitable Legionellosis Prevention plan SaniSweep XL helps to solve Legionella problems in hospitals, clinics, hotels and resorts.
The SaniSWEEP chlorine dioxide is not pH dependent and produces less disinfectant by-products compared with traditional chlorine.
The chlorine dioxide produced rate of SaniSWEEP generators varies from 0.01 to 5 lb/h which makes them suitable for any type of process application.
How does it work?
SaniSweep XL units work with diluted chemicals hydrochloric acid and sodium chlorite.
The electronic programmable microprocessor with the alphanumeric display oversees all phases of production. Safety functions are guaranteed by certified plc.
The control panel allows to modulate the dosage of chemical by the three dosing pumps, and consequently the production of chlorine dioxide.
Take a look at the graph on this side…
Special GSM/GPRS WAP electronic controllers allows a continuous control of ClO2 concentration, which does not vary with hot water consumption fluctuation.
|Production max||from 20 to 10000 g/h|
|Working Pressure max||8 bar|
|Reagent dosing amount max||from 1.8 to 66.5 l/h|
|Power Supply||Standard: 220 Vac – 1 ph|
|Power installed||3.0 kW|
|Class of production||IP 55|
|Dimensions (max)||1250x2500x480 mm|
|Reagents to be used||Hydrolic acid